Dimensional tolerances for AWWA pipe flanges


Listed below are the Dimensional Tolerances to which flanges are manufactured.  These tolerances are a part of ANSI B16.5 and AWWA C207-01 Sec. 4.2 except where noted otherwise.  The limits given are maximum.  Rigid inspection procedure assures the maintenance of high standards of accuracy in regular day to day production.
Ring type Slip-on and Blind flangesHUB type slip-on
O.D.<=24"+/- 0.6"(1.6mm)O.D.<=24"+/- 0.6"(1.6mm)
>24"+/- .12"(3.2mm)>24"+/- .12"(3.2mm)
I.D.Socket-Welding10" and Samller
+.03"(0.8mm),-0"
I.D.10" and Samller+.03"(0.8mm)
Slip-on and
Lap Joint
12" and Larger
+.06"(1.6mm),-0"
12"-18"+/-.06"(1.6mm)
20"-42"+.12"(3.2mm)
+.06"(1.6mm)
O.D. of Hub<=12"+.09"(2.4mm),
-.06"(1.6mm)
Diameter of
Contact Face
0.06" Raised Face+/-.03"(0.8mm)
14"-42"+/-.12"(3.2mm)
Diameter of Contact face0.06" Raised Face+/- .03"(0.8mm)Diameter of Hub at baseX<=24"+/-.06"(1.6mm)
X>24"+/-.12"(3.2mm)
Deameter of Contact face<=10"+.03"(0.8mm),
-0"
Diameter of Hub at point of Welding<=5"+.09"(2.4mm),
-.03"(0.8mm)
12"-42"+.06"(1.6mm),
-0"
>=6"+.16"(4.0mm),
-.03"(0.8mm)
DrillingBolt Circle1/2"-24"
/26"-42"
DrillingBolt Circle1/2"-24"
/26"-42"
+/-.06"(1.6mm)
+/-.06"
+/-.06"(1.6mm)
+/-.06"
Bolt hole
spacing
+/-.03"(0.8mm)Bolt hole
spacing
+/-.03"(0.8mm)
Eccentricity of Bolt circle with respect to bore.03" Max.
(0.8mm)
Eccentricity of Bolt circle with respect to bore.03" Max.
(0.8mm)
Thickness18"& Small+.12"(3.2mm),-0"Thickness18"& Small+.12"(3.2mm),-0"
20"-42"+.19"(1.6mm)20"-42"+.19"(1.6mm)
Length Thru Hub<=10"+/-.06"(1.6mm)Length Thru Hub<=10"+/-.06"(1.6mm)
12"-42"+/1.12"(3.2mm)12"-42"+/1.12"(3.2mm)

Get in touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.
You can get in touch by telephone, post, online or E-mail.
Please check the help section first to see if your question may be answered there.

Flanges General

Flanges General
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system.

Pipe fitting

Pipe fitting
Pipe fitting is work that involves the installation or repair of pipes or tubes. Pipes and tubes are necessary for a wide range of reasons.